As beautiful as it is resistant, marble gives a certain character to an interior. However, this natural stone is a porous material that tends to absorb stains. However, it can then be difficult to clean, especially if there are stubborn stains. Bleach should be banned, as should lemon juice or pure vinegar, all three of which are too acidic. And instead of the abrasive sponge and the scraper which can damage it irreparably, choose a soft brush or a cloth. Hard remains, whether for a floor or a worktop, find out how to clean and remove a stain on marble with the right cleaner (and without chemicals that can damage it).
Household stain removers to remove stains of unknown origin
If you do not know the origin of the stain, the best thing is touse a mild stain remover as a cleanser. This includes soapy water (preferably black soap or Marseille soap), clay stone or very fine iron wool used gently. You can also rub the stains with a damp cloth sprinkled with Meudon white or bicarbonate. Another solution: make a paste with Meudon white and baking soda (which will also work very well on limescale stains) 1/3 baking soda and 2/3 pumice powder which you will moisten with a little water to make a paste. Finally, linseed oil will wax and shine the marble, protect it from dirt and remove water stains. All these maintenance products should allow you toremoves most dirt.
Removing a Grass or Mud Stain from Marble
Whether it’s a marble floor or even funeral marble, grass or mud stains are sometimes difficult to remove. For mud, the most practical solution is to let it dry. Then just vacuum as much as possible with the vacuum cleaner and finish with soapy water on a microfiber cloth. For grass, use a paste of water and baking soda or fine-grit (000) steel wool.
Against acid stains
How to remove stains from fruit juice, lemon, white vinegar, anti-limescale, etc.? First, rinse thoroughly. If that’s not enough, a paste of grated Marseille soap mixed with water could help. Otherwise, you can also oil the stain with a fatty substance (olive oil, linseed oil, etc.) to mask it. However, you will have to repeat the application later if the stain reappears. This will remove stains and marks to restore a beautiful appearance to the marble.
Cleaning a candle stain
Let the wax dry and scrape off as much residue as possible with a spatula or spoon. Take care of do not scratch the surface to be treated. Then cover with several layers of absorbent paper and run a hot iron over everything. This will help absorb the stain to properly clean the marble.
Other grandmother’s tips for removing a stain from marble:
For ink or mold stains: Mix 1/3 ammonia and 2/3 20 volume hydrogen peroxide and rub with a soft cloth.
For paint stains: For water-based paint, use warm, soapy water. And for other types of paint, use a cloth soaked in turpentine, if necessary with a little powdered pumice if the stain is old. Rinse well.
And for a rust stain on marble: Rub the stain with a cloth of 20 volume hydrogen peroxide.